Which business energy quote is cheaper once every charge is included?

Bes the bloodhound beside a balance scale weighing a p/kWh energy sheet against coins and a calendar, illustrating business energy quote comparison.

Two business energy quotes can both look competitive and still not be comparable. A lower unit rate can lose to a higher one once the standing charge, the contract length and the other charges are added in. The only fair test is the total cost of each quote on the same basis: the same usage, the same term, the same start date and the same tax treatment.

This guide shows you how to line two quotes up properly, with a worked example where the “cheaper” rate changes places depending on how much energy the business uses. The figures are invented to show the arithmetic, dated 17 October 2026. They are not market rates, and they are not a prediction of what your business will be quoted.

The short version

  • Compare the total cost of each quote, not the headline unit rate. Ofgem says to check the type of contract, how long the term is, any fees involved, and whether any broker fees or commissions are included in the price.
  • Use the same annual usage, contract length and supply start date for every quote you compare.
  • The standing charge is paid every day regardless of how much energy you use. A low-use business can pay more overall on a quote with the cheaper unit rate.
  • Check whether prices are shown including or excluding VAT and the Climate Change Levy, and compare on the same basis.
  • A quote is usually valid for a limited time. An expired quote that is re-issued is a new offer, which may be higher or lower.

Why the unit rate alone does not answer the question

Most business energy quotes lead with a unit rate: the pence per kilowatt hour (kWh) you pay for the energy itself. It is the easiest number to put in an advert, and the easiest to compare at a glance. It is also, on its own, nearly useless for deciding which quote would cost your business less.

Your bill is not one number. It is the unit rate multiplied by what you use, plus a standing charge multiplied by every day of the contract, plus any other charges the product carries, plus VAT and, for most businesses, the Climate Change Levy. Change any one of those and a “cheaper” quote can become the expensive one.

Ofgem’s guidance on getting a business energy contract says to check what type of contract it is, how long the term is, whether there are any fees involved, and whether any broker fees or commissions are included in the price. It also says to find out what happens at the end of the contract, for example whether it renews automatically or moves you to out-of-contract or deemed rates. All of that belongs in the comparison, not just the pence per kWh.

The worked example: two quotes, same business

Imagine a business using 25,000 kWh of electricity a year, comparing two 12-month fixed quotes with the same proposed start date. The numbers below are invented for illustration.

Quote AQuote B
Unit rate24.5p per kWh22.9p per kWh
Standing charge45p per day95p per day
Energy for the year25,000 × 24.5p = £6,125.0025,000 × 22.9p = £5,725.00
Standing charge for the year365 × 45p = £164.25365 × 95p = £346.75
Total for the year£6,289.25£6,071.75

At this usage, Quote B is cheaper by £217.50 over the year, even though its standing charge is more than double. The cheaper unit rate wins because the business uses enough energy for the rate difference to outweigh the daily charge.

Both totals exclude VAT and the Climate Change Levy. Provided both quotes are compared on the same tax basis, the answer does not change. If one quote is shown including VAT and the other excluding it, you are no longer comparing like with like.

The same quotes at lower usage

Now take the same two quotes but a business using 8,000 kWh a year.

Quote AQuote B
Energy for the year8,000 × 24.5p = £1,960.008,000 × 22.9p = £1,832.00
Standing charge for the year£164.25£346.75
Total for the year£2,124.25£2,178.75

The answer flips. Quote A is now cheaper by £54.50, because at lower usage the standing charge matters more than the unit rate. The same two quotes give two different winners depending on one input: how much energy the business actually uses.

This is why a comparison has to start from your real consumption, taken from your bills, not an average. Our standing charges guide explains the daily charge in more detail.

What to line up before you compare

For each quote, write down:

  • Your annual consumption in kWh, from your bills, for the fuel being quoted. If electricity and gas are quoted separately, keep them separate.
  • The unit rates, including whether different rates apply at different times or usage levels.
  • The standing charge, per day, for each meter.
  • The contract length and the proposed supply start date.
  • Any other charges or fees, such as metering, capacity or settlement charges, and whether they are included or passed through at cost.
  • Any broker fee or commission included in the price, and how it is disclosed. Ofgem says this is one of the things to check before you agree.
  • The tax basis: whether figures include or exclude VAT and the Climate Change Levy. Most businesses pay 20% VAT and CCL; some qualify for the reduced 5% rate and CCL exemption. Our VAT and Climate Change Levy guide covers the difference.
  • The quote expiry date, so you know how long each offer stands.
  • What happens at the end of the term, including any renewal or deemed-rate arrangements.

With those written down, the arithmetic in the tables above takes minutes. If a quote does not show one of these clearly, ask for it in writing before comparing.

Charges that sit outside the headline rate

Two quotes with identical unit rates and standing charges can still differ. Depending on the product and the meter type, a quote may include or pass through charges such as capacity charges, metering charges, distribution and transmission costs, and government scheme costs. Some products fix these for the term; others pass them through at cost, which means the total can change during the contract.

Ask of each quote: what exactly is fixed, and what can change? A “fixed” contract usually fixes the unit rates, not necessarily every charge on the bill. Our guide to fixed and variable contracts explains the difference in plain terms.

Finally, commission. Most brokers and comparison services are paid a commission by the supplier you choose, built into the price you are quoted. Ofgem says to check whether broker fees or commissions are included in the price, and Citizens Advice advises getting information in writing before you agree. A quote with commission inside it is not automatically worse, but you can only judge it when you know it is there. Our guide to how brokers, comparison sites and introducers are paid sets out the three routes.

How BES fits in

Business Energy Solutions is an introducer. We do not supply energy, and we do not give advice or recommendations about which quote to choose. We introduce you to our energy partner, who gathers quotes and options from a range of suppliers so you can compare them and decide. We do not compare the whole market, and we do not promise the cheapest price.

Our service is free to you. When an introduction leads to a qualifying contract, we receive a commission from our energy partner. Our terms and conditions explain this in plain language.

Whoever gathers your quotes, the test in this guide is the same: same usage, same term, same start date, same tax basis, every charge included. The decision is yours.

Frequently asked questions

Is the quote with the lowest unit rate the cheapest?

Not necessarily. The worked example above shows a lower unit rate winning at 25,000 kWh a year and losing at 8,000 kWh, because of a higher standing charge. Compare totals on the same basis, not headline rates.

What charges should a business energy quote show?

At minimum: the unit rates, the standing charge, the contract length and start date, and any other charges or fees. Ofgem also says to check whether broker fees or commissions are included in the price, and what happens at the end of the contract.

Do business energy quotes include VAT and the Climate Change Levy?

Some do and some do not, which is why you must compare on the same tax basis. Most businesses pay 20% VAT plus CCL; some qualify for the reduced 5% VAT rate and CCL exemption. Ask how each quote is presented before comparing.

Does a quote include the broker’s commission?

Usually the commission is built into the prices you are quoted rather than added as a separate line. Ofgem says to check whether broker fees or commissions are included in the price before you agree, so ask each party to confirm in writing how they are paid.

How long is a business energy quote valid for?

It varies by supplier and product, and it can be short. Note the expiry date of each quote. If a quote expires, a re-issued quote is a new offer and may be higher or lower.

Can I compare quotes with different contract lengths?

You can, but not line by line. A 12-month total and a 24-month total cover different periods and different levels of certainty. Convert each to a cost per year on the same usage, then weigh the difference against how long you want the rates fixed.

Is there a cheapest business energy supplier?

No. Business energy is quoted per site, using your usage, meter details, location, contract length and credit position. A supplier that is cheapest for one business can be expensive for another. The comparison has to use your figures.

How do I switch business energy supplier once I have chosen?

Check your current contract end date and any notice it requires before agreeing anything. Once you accept a new contract, the new supplier and your current supplier handle the switch between them. Our step-by-step switching guide explains the process and the traps.

Sources and checks

Sources checked 17 October 2026. The worked examples use invented figures for illustration and are not market rates or a prediction of any quote.